Find the product you have in mind
This product is a phenolic resin solution with low molecular weight, which is used as reactive plasticizer in the field of molding compounds, and the dosage is 3%~8%. The product can be sprayed on molding compound powder by pressurized atomization, which can eliminate static electricity and reduce dust, and greatly improve production conditions. Using this product can improve the fluidity of molding compound by 20% -50%, without affecting the strength and other properties of the product, and can appropriately reduce the dosage of plasticizer and release agent in the molding compound formula.
technical parameters
|
model |
Appearance |
Viscosity(mPa·s/25℃) |
water content(%) |
ph |
free phenol(%) |
Free formaldehyde(%) |
|
Y25 |
But yellow liquid |
30-60 |
＜1 |
4-7 |
＜0.5 |
＜0.1 |
matters need attention
■ This product is liquid resin to prevent spillage.
■ Please wear relevant protective articles during use to avoid direct contact with skin.
Packaging and storage
■ This product is packed in galvanized barrels with a net weight of 195kg.
■ It should be stored in a cool, dry and ventilated place, away from high temperature areas; Beware of broken barrels, which should be used immediately.
■ It can be stored below ■15°C for 3 months.
